|
RALLYSPORT.CA
- Race and Rally Equipment. |
|
|
|
|
|
|
DRIFT
Camera Accessories
|
DRIFT CAMERA
ACCESSORIES and MOUNTS
These are
some of the common accessories and mounts available. Call if you need
some other mounting or replacement parts.
|
DRIFT
HD GHOST BATTERY
A spare 1700mAh
rechargeable lithium battery; allows you to swap when your original battery
needs recharging. A great accessory; ensuring your Ghost never runs out
of juice on a long action packed session.
$35.00 CDN
(Ghost 1700 mAh)
$28.00 CDN
(HD 1100 mAh)
|
DRIFT
SUCTION CUP MOUNT
A newly designed
suction mount specifically made for all current and previous model Drift
cameras.
This rugged,
industrial strength mount is perfect for attaching Drift cameras to a
car, windscreen, motorbike or snowmobile. The durable polymer composition
combined with the addition of the new, ratcheted washer the Drift Suction
Cup Mount will securely lock your camera in a set position, even under
extreme conditions.
This new
design focused on reducing the weight of the mount by over 50% to its
predecessor ensuring that it keeps vibrations to a minimum at high speeds.
Making use of the rotating lens and rotating universal clip that are a
signature of Drift cameras, the Suction Cup Mount can now be set up to
an even lower profile allowing for that perfect shot. This new design
also keeps the amount of parts needed to an absolute minimum.
$36.00 CDN
|
DRIFT
ROLL BAR MOUNT
The Roll
Bar mount is the ideal mount for the serious motor sport enthusiast with
a polyurethane cushion to ensure no slip as well as reduce vibrations.
Adjustable, with grip from 1.4 (3.55cm) to 2.5 (6.35cm), the
Drift Rollbar Mount is designed specifically with motorsports in mind.
Made from
a super tough nylon and incorporating the new ratchet washer system, the
Rollbar Mount will securely lock your camera in a set position. The Rollbar
Mount can pivot more than 180° and with your camera, rotate 360°
allowing you to capture all the action.
$36.00 CDN
|
DRIFT
HANDLEBAR MOUNT
Drifts
new, adjustable handlebar mount now allows users to securely mount their
Drift camera to handlebars of various sizes.
Designed
with a polyurethane bushing the mount is ensured not to slip and reduce
vibrations. Sizing is adjustable to grip handlebars from 0.75 (1.87cm)
to 1.4 (3.55cm) and allows you to capture all the action from the
road, trail and bike park. Made from a super tough nylon and incorporating
the new ratchet washer system the Handle Bar Mount will securely lock
your camera in a set position.
The Handlebar
Mount can pivot more than 180° and with your camera, rotate 360°
allowing you to capture that perfect shot.
$25.00 CDN
|
DRIFT
Adhesive Mount Packs
The
Drift Mounting Kit comes with one universal clip, two individual mounts,
one flat and one curved, and two pieces of 3M adhesive.
The Drift
Mounting Kit can be attached to any nonporous surface, giving you versatility
when it comes to positioning your camera.
Using the
highest quality 3M adhesive you are able to permanently attach mounts
without damaging the surface you are attaching them to.
Alternately
a pack of 5 either flat or curved adhesive mounts. A perfect accessory
for mounting your Drift camera to any nonporous, flat surfaces. Uses 3M
self-adhesive pads (included). This kit includes 5 flat adhesive mounts
or 5 curved adhesive mounts.
Drift Mounting
Kit $16.00 CDN
5 Pack Adhesive
Mounts $25.00 CDN
|
DRIFT
HD GHOST EXTERNAL MICROPHONE
Connect
a dedicated microphone to the rear of the camera, perfect for eliminating
wind noise. It also allows more directed audio, and the opportunity
to include in-helmet commentary.
$25.00
CDN (Specify Ghost or HD)
|
DRIFT
HD GHOST HDMI CABLE
Connect your
Drift Ghost or Drift HD to any device with a HDMI input. Enjoy all your
footage instantly, in glorious full high definition. Also allows you to
view what you are recording in real time.
$25.00 CDN
(Specify Ghost or HD)
|
DRIFT
LENS REPLACEMENT KIT
Ensures
you never miss a shot due to a broken lens. Includes all the parts and
tools you need to change the lens of your Drift Ghost.
$25.00
CDN (Specify Ghost or HD)
|
Time
Lapse Mount
The
Drift Timelapse Camera Mount is designed to mount your camera so that
you can take rotating time lapse photo sequences.
The Drift
Timelapse has a 1/4 thread on top that will screw in to any camera with
a standard tripod thread or any camera that has a tripod mount adapter.
The Drift Timelapse Camera Mount will rotate a full 360 degrees in 60
minutes. The bottom of the Drift Timelapse has a 1/4 female thread so
that you can securely mount it on a tripod or you can stack multiple Timelapses
on top of each other to get mutiple rotations at a quicker speed.
$29.00 CDN
|
DRIFT Shoulder
Mount
The
Drift Shoulder Mount is the perfect accessory for capturing your point
of view when the action goes down.
The shoulder
mount is fully adjustable to suit all sizes and is compatible with all
Drift cameras.
Great for
snow, motor, skate: any sport where you want to get a unique first person
perspective without following the movement of your head. The shoulder
mount is a great alternative to helmet mounting.
$49.00 CDN
|
DRIFT
WATERPROOF CASE
Allows
you to take your Drift HD or HD720 action camera down to a depth of
30m. Perfect for all your water adventures including surfing, wakeboarding,
windsurfing and scuba diving.

$60.00
CDN (Specify Ghost or HD)
|
|
|
DRIFT
CARRY CASE
Perfect
for carrying your Drift camera, spare battery, memory cards and accessories.
$25.00
CDN
|
|
Rallysport.ca
is a Calgary, Albert, Canada based source of performance parts and safety
equipment for race and rally teams. Focusing on legal racing
activities whether that is drag racing, sports car racing, stock cars, sprint
cars, drifting, off road 4x4 and street/show cars, we can provide the equipment
needed as teams and drivers try to improve the performance of their vehicles
to GO RACING and WIN RACES! |
To
order this product call us at (403) 277-6291 or 1-866-277-6291 or use
the contact page for email and web contact.
|
|
Contact
| About | Privacy Policy
| Terms | Sitemap |